The 5 cubes sculpture project -- parts list
Parts with a line through them have already been acquired.
The list
Materials for Phase one Phase one complete
30x 4.5' geodesic dome struts
12x 3/8"x4" eye bolts(~$20)
12x 3/8" nuts(~$15)
12x 3/8" nylon lock nuts(~$15)
24x 3/8" washers(~$5)
12x 3/8" lock washers(~$5)
Materials for Phase two
210' 3/64" 7x7 steel cable (~$50)
75x 3/8"x3/4" bolts (~$30)
100x 3/8" nuts (~$10)
120x 3/8" washers (~$5)
120x bicycle shifter cable endcaps (~$5)
120x 3/64" aircraft cable loop crimps (~$10)
Materials for Phase three (~$700)
Materials for Phase four
- 6x arcade-style buttons (with leaf switches)
- Cabinet material (acrylic? MDF? wood? sheet metal?)
Materials for Phase five
- vector circuit board
- 6x SPDT-NO 5V power relays
- RJ-45 jack
- 3' 2-conductor wire
vector circuit board
7805 voltage regulator
NE555 oscillator
10pF capacitor
100uF capacitor
1k resistor
10k potentiometer
7493 counter
7404 hex NOT
6x 7410 triple 3-input NAND
- RJ-45 jack
- 3' *baseT network cable
Materials for power outdoors
- 150+W of solar panel ($200)
- charge controller for the solar panels
- ~100Ah of deep cycle battery ($300)
- Wire and terminals/lugs to connect all of the above($100)